|
| |
DC System Analysis Modules
The
DC System Analysis modules include Battery Sizing, DC Load Flow, DC Short
Circuit (ANSI), and DC Short Circuit (IEC).
Compliance with Industry Standards:
 |
Battery Sizing - IEEE standard 485 for sizing Lead-Acid batteries and IEEE
standard 1115-2000 for sizing Nickel-Cadmium batteries, determines the size of
batteries to supply the worse case DC duty cycle loads and AC emergency loads. |
|
|
DC Load Flow - Calculates power, current and voltage drop profiles.
Represents constant kW, I, and Z, load types and evaluates all loading
conditions for duty cycle loads and AC emergency loads. |
|
|
DC Short Circuit - ANSI standard 399 and 946, calculates the initial rate
of rise and peak fault current. |
|
|
DC Short Circuit - IEC standard 61660, calculates the peak fault current,
time constants, time to peak, and steady state conditions. |
Benefits:
|
|
Save time with intuitive scenario manager interface. |
|
|
Communicate designs effectively with graphical and text base results. |
|
|
Improve decisions by quickly comparing resulting curves from different
scenarios. |
|
|
Increase productivity by
modelling both DC and AC systems in a single
project. |
|
|
Reduce mistakes by evaluating all loading conditions and duty cycle loads. |
|
|
Battery Sizing and Load Flow automatically calculates AC emergency loads
and their impact on the DC system to help you design safer and more reliable
systems. |
DC Equipment Library:
|
|
Battery Library - Rt Curve and Discharge Curve for Lead-Acid and
Nickel-Cadmium batteries. |
|
|
DC Generator Library - Name Plate data, Transient Resistance and
Inductance. |
|
|
DC Motor Library - Name Plate data, Transient Resistance and Inductance. |
DC Component Types:
|
|
Lead-Acid Battery |
|
|
Nickel-Cadmium Battery |
|
|
Rectifier |
|
|
DC Cable |
|
|
DC Bus/Node |
|
|
DC Load |
|
|
DC Motor |
|
|
Train |
|
|
DC Generator |
|
|
Inverter/UPS |
|
|
DC-DC Converter |
|
|
DC Capacitor |
Download the brochure in PDF format:
DC Modules.pdf (85kB)
Download
Acrobat Reader - version 5.0 (or above) required.
|
