Three-phase Secondary Injection: DRTS33
This secondary injection tester has 3 channels and is designed for testing protection relays, energy meters, transducers and power quality meters. This test set is designed primarily for manual control via the HMI; an option is available to link to a computer for remote control. For testing three-phase differential relays, consider the DRTS66.
Main Features:
Direct manual control via HMI
Simultaneously available: 3 Current and 3 Voltage plus 1 battery simulator outputs.
High current outputs: 3 x 32 A, (1 x 96 A)*
High power outputs: 3 x 430 VA, (1 x 1000 VA)**
Voltage outputs: 3 x 300V at 100 VA
High accuracy outputs: better than 0.05%
Optional IEC 61850 protocol interface
USB and Ethernet interface
Pen drive interface
Optional internal GPS and IRIG-B interface for end-to-end tests
Optional PC control using TDMS - Advanced Test and Data Management software
Complete library of relays from all major manufacturers.
*: Connect current outputs in parallel to increase current; connected outputs must be in phase.
**: Connect current outputs in series to increase power; connected outputs must be in phase.
Direct manual control via HMI
Simultaneously available: 3 Current and 3 Voltage plus 1 battery simulator outputs.
High current outputs: 3 x 32 A, (1 x 96 A)*
High power outputs: 3 x 430 VA, (1 x 1000 VA)**
Voltage outputs: 3 x 300V at 100 VA
High accuracy outputs: better than 0.05%
Optional IEC 61850 protocol interface
USB and Ethernet interface
Pen drive interface
Optional internal GPS and IRIG-B interface for end-to-end tests
Optional PC control using TDMS - Advanced Test and Data Management software
Complete library of relays from all major manufacturers.
*: Connect current outputs in parallel to increase current; connected outputs must be in phase.
**: Connect current outputs in series to increase power; connected outputs must be in phase.